We provide the latest Flash Up Tool and Firmware for our CD-R/RW drive as follows. We would like you to take responsibility for renewal of the firmware. Please make sure of the model name of your drive and choose the right firmware for it. Please take good care in your choice of firmware, since if you choose incorrectly, then, your drive, or disc may malfunction.

We are not liable for any damages or loss, or however that may be caused.

CRD-BP4 Software Downloads
Flash Up Tool Firmware
FlashTool306e.exe (213KB) Update!
*Flash procedure by WinFlash
Bp4_432.exe (138KB) Latest!
-WindowsXP has been supported
Bp4_431.exe (130KB)
-DAO/RAW write/read has been supported
-Improvement of CD-G playback ability
-FUJI FILM and HITACHI MAXELL CD-R Disc has been supported
Bp4_428.exe (129KB)
System requirements
Host PC : IBM compatible PC (Pentium MMX-166MHz or more)
Memory : 32MB required （64MB recommended）
OS : WindowsXP、Windows2000, WindowsMe, Windows98SE, Windows98, Windows95OSR2
[Note] In case of WindowsXP & Windows2000, the only users who have authority of administration can execute.
ASPI :

Except for WindowsXP & Windows2000, the recommendation is Adaptec SCSI host adaptor AHA-2940xx series.
For WindowsXP & Windows2000, the recommendation is SANYO sanscsi.dll.
| Downloads Menu | BP1700P | BP1600P | BP1500U | BP1500P | BP5 | BP1400P | BP4 | BP1300P | BP3 | BP900P | BP2 |
Go to Home Page
Copyright(C) 1999-2005 SANYO Electric Co.,Ltd. All rights reserved.