 |
| We are carrying the Flash-up
procedure by a WinFlash as follows. We are not liable for any damages or loss, or what so ever that may be caused. [Note] In case of Windows 2000, the only users who have authority of administration can execute. 1. The selection of drive
Then, the drives which are available for the Flashup by WinFlash are listed in the main screen's Drive Select Window. Select the drive to flash by clicking the drive in the Select Window. (The selected drive will be highlighted and its information will be displayed on the screen.) [Note] In case of Windows 2000, the indication will be not HID, TID indication, but drive letter indication. 2. The selection of firmware file Display the file reference dialog by clicking the " Browse.." button
in the main screen. Then, select the firmware file to flash. 3. The confirmation of the Flash drive and file Reconfirm the selected drive and the file after the check dialog is displayed. (Refer to the left screen.) (To cancel, click the "NO" button.) Click the " Yes " button to start to flash on the selected file and drive. Then, the Flashup starts. [Note] In case of Windows 2000, the indication will be not HID, TID
indication, but drive letter indication. 4. During the Flashup execution
[Note] In case of Windows 2000, the progress bar will not be indicated. 5. The completion of confirmation
Confirm the Flashup is completed correctly. Then, push the "OK" button to return to main screen. [Note] In case of Windows 2000, reboot system after the flashup because the screen for confirmation of reboot will be indicated instead of this screen.
|
Flash
procedure by WinFlash 
The
kind of left screen is displayed when the WinFlash is activated. 
After
confirming the drive and file are selected correctly, click the " FlashExecute"
button in the main screen.
During
the Flasup execution, progress bar is displayed.
The
drive information before and after the Flashup is displayed when the
Flashup is completed correctly.
| CLOSE |